> Also need the valve cover too. The one with 4 screws holding it on,
> not the WWII style with 2 studs coming up through the cover.
>
Jim,
If you want to retain the WW2 rocker cover, all you have to do is
replace the appropriate two rocker gear studs on the 235 head with the
WW2 threaded rods from the 216 head. The gasket will cover the four
small holes that normally were used to screw down the 236 cover.
-- Dave Prince VK4KDP Ipswich, Queensland, Australia davprin@gil.com.au http://www.home.gil.com.au/~davprin
=== To unsubscribe from the mil-veh mailing list, send the single word UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.