Re: [MV] Speedometer on M35A2

ET =?iso-8859-1?Q?Lance=2DG=F3mez?= (etlance@execpc.com)
Sun, 16 May 1999 15:53:30 -0500

Cliff:
I had this problem once on my M715. It turned out to be that the cable was not fitting all the way into the transfer case. Try screwing
the fitting on tight. I think mine problem was caused by the square drive piece being cut only just long enough. If I keep the fitting
tight, no problem.
TED

Cliff Dahl wrote:

> Oh wise ones on the list:
>
> My Speedometer on the M35A2 is not working. Checked the cable by hooking a
> drill to it at the transmission/transfer end and it worked good. Took the
> "L" shaped convertor off the transfer and it also was good. Problem
> appears to be inside of the transfer case. Any ideas? It doesn't look
> simple to me.
>
> Thanks in advance,
>
> Cliff Dahl
>
> ===
> To unsubscribe from the mil-veh mailing list, send the single word
> UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.