TM 9-803 calls for 3/4" freeplay in your clutch pedal. I would not want much
more than that or you may not be able to disengage the clutch. I think the
cable may be able to fall off if it is adjusted too loose.
Dave Fillman
45 MB
---- you wrote: >
> Because I own CCKW's and Chevy's, all my clutches are adjusted so that they
> just disengage about 1/2" above the floor. If you don't do this,you will
> overstress the diaphragm spring on the (tin can) clutch and it will fail by
> twisting and then failing to disengage.> > >
> On my GPW, if I adjust the pedal this low, is there ANY possibilitythatthe
> clutch cable will fall off of the fork inside the bellhousing?> >
Steve
----------------------------------------------------------------
Get your free email from AltaVista at http://altavista.iname.com
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.