[MV] Vent Lines
Sean Bathrick (Bathrick@imcchemicals.com)
Thu, 02 Sep 1999 15:30:35 -0500
I am slowly but surely righting the wrongs of the former owners of my jeep =
and need some help. I need to know where the vent lines on an M38A1 are =
plumbed to. For instance, the master cylinder, I believe is plumbed up to =
the cross over tube, along with the tranny and xfer. But it is difficult =
to tell in the manual were everything goes. For instance, it appears that =
the carb vent goes to the distributor vent fitting, however, if the float =
sticks and fuel goes through the vent to the distributor, boom! And if it =
goes to the crossover, then fuel is filling up the tranny, xfer and master =
cylinder. And help would be appreciated.
Thanks
Sean
MVPA 14222
53 M38A1
51 M135
67 M416
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.