[MV] Mystery seals repost.

Gavin Broad (invest@portsmouth-mann.com)
Thu, 23 Sep 1999 19:47:53 +0700

Esteemed Listers,

Unfortunately, I got no wiser about these mystery seal kits that I ended up
with in my horn button kits. Pics available and here's a description of
the 3 pieces:

1. Rectangular (appx 3 and 3/4" X 2 and 1/4"), 2mm thick, rubber gasket
with a screw hole in a protrusion of the gasket in the middle of each side
length.

2. Circular, flat, rubber gasket, 2mm thick, with 3 equi-spaced holes on
the periphery. Internal diameter 2" and external diameter 2 and 15/16ths-ish.

3. chunky, 3/4' thick rubber donut with matching screw-holes to item 2.
The hole would take a number 10 screw. One face of this thing has a recess
in which sits an O-ring. The internal diameter is smaller at 1 and 3/8"

Any leads appreciated.

Thanks

Gavin

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.