I do not recommend plugging the oil filter line. They may not be as good as a new syle full flow system, but they do work. The cannister lid has a rubber seal and a copper washer for seals. You may have a little trouble finding them, but a good parts store should be able to get them. If you want to plug it anyway, it is the top line. Follow the hose back to the block and remove the fitting from the block. Use a 1/8 NPT pipe plug to seal the hole. Change your oil more frequently than normal.
Dave Fillman
45MB
---- you wrote:
>Snip<
> Ok, I'll wrap this up. HOW DO I BEST PLUG THE INLET TO THE OIL FILTER ON A
> GPW??? Is it the top line that connects to the side? Where is the best place
> for the stoppage? Is there a way to seal the cannister lid instead? Do you
> guys even think it is a good idea to plug off the filter? Am I the only
> person that this has happened too?
>
> Regards, a seriously bummed out,
>
>
> Bob Kelly
----------------------------------------------------------------
Get your free email from AltaVista at http://altavista.iname.com
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.