Hi List
This is all wireless kit I want for my Bedford QL Radio Truck....
specifically WS19 and WS 52 wireless kit.
I'm hunting for toys again...
I recently acquired a Canadian WS52 in its frame carrier... however I need
the Supporting Bracket it sits on that holds the set above the operators
table. My installation manual purely describes the bracket as follows....
"Bracket, Supporting, 45.9/16 x 13.1/8 x 4.1/2 in"
Which isnt really a great deal of use to even get one made.
This Bracket has been described to me as a steel frame with supporting
"legs" at each end of the frame, with an additional one in the middle. The
Bracket holds the set 4.1/2in over the operators table.... rather vague
since I understand there is a fitting that clamps the 52 set onto this
frame... I have no details on that.
Does anyone out there have one of these brackets, that I can either buy, or
get some photos and drawings done so that I can try to get a reproduction
made.
Once I get one of these brackets, I can then look to starting the
installation process for my WS 52, WS19 and other junk...
I also believe there is a similar type of Bracket for the Carrier No 21 (for
the WS19 and PSU).... I have something that would do the job, but it's home
made and probably a fair way from being correct.... So I need one of these
too... at least to look at, possibly to buy.... and if anyone has a surplus
Carrier No 21 with web straps, I'd be interested - I have a Carrier No 25 to
get rid of.
For my WS52... I need a few bits... the Aerial Lead that connects the
Receiver and Transmitter together (Leads, Aerial No C7)... the Aerial lead
that connects the transmitter to the Aerial Tuner (Leads, Aerial No C6) and
the lead that connects the Aerial Tuner to the Aerial Base (Connector,
Single, No 7C - ZA10318).
I need a couple of other bits too....:
WS19 Amplifier No2
WS52 Lamp Operator No C1
WS52 Remote Receiver
WS52 Remote Receiver Supply Unit ZE 12 (Inc Connector Twin 5ft, No C1 and
Connector 3 Point no C1)
Wireless Remote Control Unit Canadian No 1. (Need Two)
Rejector Unit No 1 Mk.2/1
WS52 - Leads Counterpoise No C1
Bag, Aerial Gear No C1 (For ancilliary items for 20' and 34' telescopic
masts)
Bag, Aerial Gear No C2
Case, Carrying No 2 antennae rods F
Case, Operating, Remote Receiver, Wireless Set Cdn 52
Case, Spare, Parts, No 5C Mk 1/1 (For WS19 Spares)
Case, Spare, Valves, No 5 Mk 1/1 (For RF Amplifier)
Batten, Distribution No 2
That'll do for now....
Cheers
Tim
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.
This archive was generated by hypermail 2b29 : Wed Jan 05 2000 - 22:42:04 PST