*This message was transferred with a trial version of CommuniGate(tm) Pro*
At 05:25 PM 3/5/00 -0700, Lisa wrote:
>*This message was transferred with a trial version of CommuniGate(tm) Pro*
>See below:<snip>Alternately, how about sources for the cloth-reinforced
>wire used
>in
>
> > slightly older trucks like my 1972 6x6? That wire was made by
> > Prestolite, according to the markings.
>
>I saved this from another mailing list because I knew it would come in handy
>someday...
>
> > There is a very similar wire avaiable at most electric supply
> stores. It is
> > called Silicone Rubber Motor Lead - SRML for short. It is available in
> most
> > smaller sizes in 500 foot rolls. Has a silicone rubber inner insulation,
> > with a woven fiberglass outer layer. In black and white it looks very
> > similar to the original wire. They will NOT have this wire at the common
> > home store. It is designed for high temperature leads to motors and light
> > fixtures. Some electric supply stores may not carry it, as it is fairly
> > specialized; however, they can order you a roll.
a place that sells parts for stoves has it in 12 and 10 gage mite be 14
and 12 gage
3 Pisces one red one white and one black in a 20 ft rool for wiring a elt
stove
IF you can use the short 20 ft Pisces
butt the silacone in side is all white i dont think white shows unless
you bewnt it sharp IF at all
good luck and keep tham rolling
> >
> >
>
>
>
> >
> >
> > Thanks in advance for any help...
> >
> > --
> > Mark J. Blair, KE6MYK <mblair1@home.net>
> > PGP 2.6.2 public key available from http://pgp.ai.mit.edu/
> > Web page: http://www.qsl.net/ke6myk/
> > DO NOT SEND ANY UNSOLICITED COMMERCIAL EMAIL TO THIS SITE
> >
> > ===Mil-Veh is a member-supported mailing list===
> > To unsubscribe, send e-mail to: <mil-veh-off@uller.skylee.com>
> > To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@uller.skylee.com>
> > Send administrative queries to <mil-veh-request@uller.skylee.com>
>
>
>
>
>===Mil-Veh is a member-supported mailing list===
>To unsubscribe, send e-mail to: <mil-veh-off@uller.skylee.com>
>To switch to the DIGEST mode, send e-mail to <mil-veh-digest@uller.skylee.com>
>Send administrative queries to <mil-veh-request@uller.skylee.com>
This archive was generated by hypermail 2b29 : Tue Apr 04 2000 - 21:57:06 PDT