*This message was transferred with a trial version of CommuniGate(tm) Pro*
Apply thread sealant to the threads of the offending bolt, reinsert and
torque to specs.
Gary Pavone wrote:
>
> *This message was transferred with a trial version of CommuniGate(tm) Pro*
>
> Oh learned ones,
>
> I have a '52 M38 with the flathead engine. I noticed the other day that
> coolant is slowly leaking out from under the lifting ring plate which is
> bolted to the top of the head. Today I removed this lifting contraption and
> looked underneath. It was dry. I started the engine and the coolant started
> coming up from around one of the threaded bolts that stick up out of the
> head (that holds this lift ring plate in place). Of the three bolts, it was
> the one on the driver's side in the back.
>
> Any help would be appreciated. Thanks in advance.
>
> Gary Pavone
> gpavone@thegrid.net
> MCA# 43889
> MVPA# 19394
> Tailhook# 32593
> ICQ# 5369101
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@uller.skylee.com>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@uller.skylee.com>
> To reach a human, contact <help@uller.skylee.com>
This archive was generated by hypermail 2b29 : Thu Jun 01 2000 - 22:37:12 PDT