Hi Ted...
>Are there 16 inch 6 bolt steel wheels available out there that fit the M-1009,
>and if so, would you know the width of those rims?
I did a LOT of research on CUCV wheels (M1009 and others) and
determined that you are correct that M1009s always used 15" 6-bolt and
all others used 16" 8-bolt.
M1009s never used 16" wheels.
CUCVs did not have special wheels...they are the exact same as the
civilian wheels. If you choose to use the 15" wheels, you need not
search for "CUCV" wheels. There's no such thing.
>Oh, and asking prices?
Go to your local junk yard and pick out 5 of their best 6-bolt Chevy
truck wheels, then have them bead blasted and powder coated
medium-luster black. That's what I did and they look beautiful! Just
be sure the boneheads remove the old weights before they powder coat
them (my powerboats neglected to do this, but luckily the weights were
all on the backsides of the wheels!).
>Am looking at aftermarket tires that take a 16 inch by 6-7 inch wide
>rims. Hence my question.
Again, I would suggest the Buckshot Mudders for your 15" 6-bolt
wheels. They make 3 different sizes. You'll like these tires because
they go right on to stock wheels and are very tall and narrow and very
military looking. Here's a link to the supplier:
http://www.natltire.com/ntw0799/pages/mudders.html#Anchor-SIZE-11481
Good luck.
--Jim "Ike" Newton
o 1984 M1007 CUCV Military Suburban 6.2 Liter Turbo-Diesel Engine 5/4 Ton Cargo Capacity, 4WD
o 1971 M35A2 Military Troop/Cargo Truck "Deuce and a Half" 478 Cubic Inch Turbo-Diesel Multi-Fuel Engine Air Shift Front Axle 2 1/2 Ton Cargo Capacity, 6WD
See them at: http://www.CUCV.net
This archive was generated by hypermail 2b29 : Fri Dec 07 2001 - 00:36:24 PST