1 gallon of muratic to 2 gallons of water, soak 10-15
minutes, neutralize with water, Dry then coat with a
film of oil.
Hope this helps!
Jeff Smith M*V*P Dip & Strip
Pensacola, FL
www.mvpc.com/dip.htm
850-475-5030
--- King <landy@pacificcoast.net> wrote:
> Does anyone have any experience with cleaning metal
> using muratic acid?I
> want to clean a crank shaft that has surface rust
> and was thinking of mixing
> up a solution of acid and putting the whole crank
> into it for a period of
> time until the acid does it's job.What I am
> wondering is does it affect the
> metalurgy at all and what can be used as a
> neutralizer after.Also what would
> be a strong enough solution of acid % to use?
> Andre
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to:
> <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com
This archive was generated by hypermail 2b29 : Fri Dec 07 2001 - 00:36:25 PST