[MV] M35 wire

From: Steve (SteveK@owens-export.com)
Date: Mon Nov 12 2001 - 10:33:18 PST

Next message: Amnon Nissan: "M35A2 front axle boot"
Previous message: Mark J. Blair : "Re: [MV] Multifuel compressor pulley slipping"
Next in thread: jonathon: "Re: [MV] M35 wire"
Maybe reply: jonathon: "Re: [MV] M35 wire"
Maybe reply: DDoyle9570@aol.com: "Re: [MV] M35 wire"
Maybe reply: Morgans: "Re: [MV] M35 wire"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Dont have any wire right now but we have
the Rubber connectors for $15 per bag of 10 pcs.
If you require a quantity, let me know and I can give
you a better price on 50 pcs or more.
Connectors are shown on our web site.

-
Steve - stevek@owens-export.com

#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#
               Owens Export Service
             http://www.owens-export.com
           Tel: 818-772-0806 Fax: 818-772-4799
#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#~#

From: "uniquemachine" <uniquemachine@air1.net>
Subject: [MV] M35 wire
Date: Sat, 10 Nov 2001 10:09:55 -0800
Message-id: <3bed6d73.ff7.16838@air1.net>

Trying to find a source for the wire that is used on the M35A2 for the
lights,
etc.(14 Ga). Is this available new, perhaps in a roll? How about new
connectors and rubber boots(packard type)? Trying to find an inexpensive
source
if anyone knows. Also, how about the 3 way connectors.

TIA
Jon

Next message: Amnon Nissan: "M35A2 front axle boot"
Previous message: Mark J. Blair : "Re: [MV] Multifuel compressor pulley slipping"
Next in thread: jonathon: "Re: [MV] M35 wire"
Maybe reply: jonathon: "Re: [MV] M35 wire"
Maybe reply: DDoyle9570@aol.com: "Re: [MV] M35 wire"
Maybe reply: Morgans: "Re: [MV] M35 wire"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri Dec 07 2001 - 00:36:59 PST