I have gone to mounting (to where ever possible) the number plates on the
axle housings using
either wire or custom made brackets.
I have not had any problems with the law or police. I have a rotted front
fender from having drilled
two holes in it to do the original mounting.
Steve
----- Original Message -----
From: <M35products@aol.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Monday, January 14, 2002 7:19 PM
Subject: Re: [MV] How Does One Mount License Plates on a Deuce?
> The rear plate can be mounted under the left tail-light assembly, using a
> standard replacement plate bracket. Illumination can be provided by
creating
> a small "window" in the bottom of the tail-light assembly, using a ~ 1.5
> inch hole saw.
>
> I use two small rubber cargo straps (the kind with the "S" hook at each
end),
> to mount the front plate to the front bumper, when operating over the
road.
> When I arrive at the objective, I remove the plate and stick it under the
> front seat.
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2b29 : Wed Feb 06 2002 - 11:49:27 PST