From: tom-nooneofconsequence (milveh@carr.org)
Date: Tue Nov 19 2002 - 07:14:48 PST
flame heater should only be used after engine is cranking. cranking
speed should be at least 300 rpm .NEVER use ether it will break the
piston rings, and the engine may overspeed since there is nothing to
control rpm. if your engine does not start almost instantly down to 0
degrees f., there is something wrong. fix it.
tom
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:37:52 PDT