From: Dave Ball (vought@msn.com)
Date: Tue Jan 21 2003 - 13:56:02 PST
In the harness there is a bulge were the left and right side break out and
go to each side of the rear frame un-tape it there and see if there are any
melted wires.
Dave
----- Original Message -----
From: "Gundocmike" <gundocmike@okplus.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Tuesday, January 21, 2003 1:13 PM
Subject: [MV] Brake light headache
> Howdy List,
> I have a problem headache, my brake lights on both sides don't work, I
tested the brake switch, it's
> OK. I'm getting juice to the #75 wire that goes to the rear of the
vehicle, but the connection at
> each brake light doesn't have any juice. Tail lights & turn signals work
OK. I ran the wire from the
> pedal to the brake lights and they all look OK. Any suggestions.
> Thanks, Mike
>
>
>
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Wed Apr 23 2003 - 13:25:02 PDT