RE: [MV] Best Penetrating oil

From: Horrocks, Aaron (ACHb@pge.com)
Date: Mon Feb 14 2005 - 07:20:54 PST


http://www.kanolabs.com/

I was introduced to Kroil by this list a couple years ago, and it's the
best penetrating lube I've ever used. I only wish I knew about it
earlier, as it would have saved me a lot of bolts and parts on my M38A1.
Things that I thought were seized and long gone could now be recovered
with this stuff. I can't praise it enough. Last year I used it to free
up a seized model airplane engine that was in storage for over 10 years.
Too bad I failed to properly set the programmable trim on that radio
controller, but that's another story.

Aaron Horrocks
ARG, NRA, Mopar Alley, & MVCC Member
1952 M38A1
1970 Plymouth
 

-----Original Message-----
From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org] On
Behalf Of Greg
Sent: Sunday, February 13, 2005 10:54 PM
To: Military Vehicles Mailing List
Subject: Re: [MV] Best Penetrating oil

Randy! How ya doin?

Kroil! Kroil is it. Let me know if you can't find it up there.....I'll
grab a can of aerokroil and fire it off to you.

Greg

----- Original Message -----
From: "Randy Bauer" <uneedamog@webtv.net>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Sunday, February 13, 2005 7:36 PM
Subject: [MV] Best Penetrating oil

>
> I'm helping a friend get a Military Condor motorcycle (Ducati
> Powered) up and running after a long storage. What is the best
> substance to use to free a stuck a carb slide. WD 40 has not worked.
>
> Thanks
>
> Randy
> MVPA 9140
>
>
> ===Mil-Veh is a member-supported mailing list=== To unsubscribe, send
> e-mail to: <mil-veh-off@mil-veh.org> To switch to the DIGEST mode,
> send e-mail to <mil-veh-digest@mil-veh.org> To reach a human, contact
> <ack@mil-veh.org>
>

===Mil-Veh is a member-supported mailing list=== To unsubscribe, send
e-mail to: <mil-veh-off@mil-veh.org> To switch to the DIGEST mode, send
e-mail to <mil-veh-digest@mil-veh.org> To reach a human, contact
<ack@mil-veh.org>



This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:39:52 PDT