From: Bob Ternes (racecadet@yahoo.com)
Date: Fri Apr 08 2005 - 08:18:48 PDT
For reference, here's a digipic of the place on
the engine that indicates whether the block is
the "TD" Tom's referring to.
http://www.planetbantz.com/imghost/bob/TD-on-my-herc-block-enhance.jpg
The "TD" are little raised letters in the
casting, about 3 inches to the right of the
bottom right corner of the dataplate. If someone
wants a bigger hi-res picture showing the whole
dataplate and side of the block, email me. It's
about 300kb.
Cheers
Bob Ternes
68 M35, currently undergoing major elective
surgery
--- tom bauer <milveh@verizon.net> wrote:
> the TD stands for thick deck. the bolt torque
> is much higher. if you
> don't have TD on the block you may have
> recurring problems regardless of
> what you do.
>
> now i realize this is not likely but i need the
> transmission computer
> for a 1994 FMTV 5 ton with an allison MD3070PT.
> i think it has the
> keypad attached to it and is probably a tec-I
> or maybe even a tec-II
> with a large connector and probably a small
> one. mine is missing and
> this is about all i know at this time. any help
> or leads appreciated.
>
> thanks, tom
>
> ===Mil-Veh is a member-supported mailing
> list===
> To unsubscribe, send e-mail to:
> <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:42:53 PDT
