From: John Stewart-Smith (micdunn@ev1.net)
Date: Fri Apr 29 2005 - 06:48:53 PDT
Mark, go to the back of TM 9-2320-361-20.
There are a bunch of foldout pages.
Foldout #1 is the entire M35A2 schematic.
If I was going to make this modification, I would attach wire #16, which is
input 24V to the left foot dimmer switch, (from headlamp switch pin M) and
attach it to wire # 491, which goes to both front park lights and comes from
pin B of the headlamp switch.
I think its pin B, the schematic is indistinct. The little metal tags on
each end of the wires are marked so:
Left foot dimmer switch: 16
Front park lamp: 491
Headlamp switch, both headlamps power: 16
Headlamp switch, park lamp power: 21
Realize if you connect the two, your headlamps will come on in the Park
position.
Enjoy.
-Sarge
----- Original Message -----
From: "Mark B. Anderson" <mark@aasurplus.ca>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Friday, April 29, 2005 7:43 AM
Subject: [MV] question about front lights on m35a2
> Hi all,
>
> ok question for everyone. Which TM do I need to look at to figure out the
> front lighting of the M35A2.
> what I need to do is make the front park lights come on with the
headlights.
> Is this possible which wire do I splice in? the TM would be the best I
think
> and I have them all but cannot find the pages I need to do this?
>
> any help here is great thanks for your time.
>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:42:57 PDT