From: Rick v100 (rickv100@yahoo.com)
Date: Mon Oct 17 2005 - 17:09:55 PDT
Nice Porsche's
--- Muttguru@aol.com wrote:
> Dear listers,
>
> a mutt-owner in the US (Utah) has contacted me to
> see if I can help him find
> some body parts for his A2 restoration. Essentially,
> what he needs is a "front
> half" of a demilled M151A2. If you can help, or if
> you know of anyone with an
> A2 front end, please let me know and I'll pass the
> details on to him. He has
> outlined the areas that he needs in the following
> photos. The photos won't
> show in the post below, but you can follow the links
> to view each photo....
>
> Here's what he says..........
>
> Ken,
> here are the areas I need for my restoration:-
>
> Pic #1. Cowling
> -I would like 100% both left and right panels all
> the way down to the frame
> as depicted inside the yellow-line, to include the
> areas (edge/lip) that are
> already spotwelded. Includes everything already
> attached/welded on top of these
> panels.
>
>
http://www.surfacezero.com/g503/data/500/Engine_Comp.jpg
>
>
>
>
>
> Pic#2. Dash:
> -I would like the entire Dash inside the
> yellow-line, to include about 1/2
> inch of the edge that rolls around the sides and top
> in order to allow fitting
> the dash for welding. I would like to keep the
> entire bottom edge as exists,
> including the spot welded strip on the lower left
> and lower right of the surface
> portion of the dash (in the red circles).
>
> http://www.surfacezero.com/g503/data/500/Dash.jpg
>
> v/r
> Jeb
> _________________
> Kind Regards,
> Ken
> muttguru@aol.com
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to:
> <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to
> <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:30:47 PDT
