From: Rikk Rogers (Rkltd@swbell.net)
Date: Mon Oct 17 2005 - 20:51:17 PDT
Likely it is the pressurization line for fording (open ended guess).
Rikk Rogers
-----Original Message-----
hi.
I'm a long time list lurker (past 5 years) who has turned to the
I was working the truck this afternoon (pulling logs) when I heard a hiss
So, it appears that the air vent system on the truck is venting off
As everyone else says, thanks to the list for helping
kurt miller
===Mil-Veh is a member-supported mailing list===
Do you have a fording kit?
RK Lion Ltd.
R3 Box 423 B
Wellston OK 74881
MVPA 22345
Hard Wire 405.258.6767
Cell 405.664.1400
From: Military Vehicles Mailing List [mailto:mil-veh@mil-veh.org]On
Behalf Of kurt
Sent: Monday, October 17, 2005 4:14 PM
To: Military Vehicles Mailing List
Subject: [MV] deuce air system troubles
knowledge of the list every once in a while. (Mr. Doyle comes
to mind). Anywho, I am in need of the list's help once more.
of
air followed within 15 seconds by the low air buzzer. I drove
the truck back to the garage (100 yds) with the buzzer buzzing
but with a working brake pedal. Once in the garage I narrowed
the escaping air noise to the engine breather tube. I shut off the
truck and placed my hand over the downward end of the tube to verify.
Sure enough, the air was leaking out the end of the tube. I followed an
air line going into this breather tube back to the air hydraulic brake
cylinder. There is a branch off to the master cylinder reservoir, making
it certain to me that this is a air vent line.
all my compressed air. Does this mean time to overhaul the
air hydraulic cylinder? Can some valve or gasket or something
internal in the air hydraulic cylinder have failed causing the truck's
compressed air to bleed off quickly to the vent system?
with this problem.
Pittsburgh (Go Steelers!)
M35A2
To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
To reach a human, contact <ack@mil-veh.org>
This archive was generated by hypermail 2.1.4 : Tue Jul 18 2006 - 21:30:47 PDT