Enjoy!
Steve
The following are the pn's for the inner axle seal for the CCKW/DUKW. These are
thinner 1/2 as thick as the original so 2 can be used
===============================================================================
Inner front Federal Mongul 353141 (notice the "353" as in CCKW-353)
axle seal Banjo
CCKW/DUKW
-------------------------------------------------------------------------------
CCKW inner GMC 3665138 (The pn 6019 on seal does not cross
wheelbearing correctly) Banjo
seal
-------------------------------------------------------------------------------
Pillow Block National 410316 (not sure about DUKW)
seal CCKW
-------------------------------------------------------------------------------
Tranny rear
seal CCKW/DUKW National 10365
-------------------------------------------------------------------------------
Rear wheel cyl Wagner/EIS FD3677/EW3677 civy cylinders no special
CCKW/DUKW/Chev plating
-------------------------------------------------------------------------------
Frnt wheel cyl EIS EW3406 (passenger side only Fitting not
CCKW/DUKW/Chev angled upward)
-------------------------------------------------------------------------------
Brake hose EIS/Raybestos SP847/BH4960 (24 5/8")
CCKW/DUKW
-------------------------------------------------------------------------------
Brake hose EIS SP183
Chev frnt
-------------------------------------------------------------------------------
Brake hose EIS EIS191 (the EIS in the pn may be SP) (17")
Chev rear
-------------------------------------------------------------------------------
Master cyl
CCKW/DUKW same as M35 deuce
-------------------------------------------------------------------------------
Water pump TRW WP1042N
CCKW
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.