>Thanks to everyone who responded, I now have complete #'s for oil and fuel
>filters, I'll pass this on in case nobody has the correct #'s for belts,
>they are GATES 17465 for the alternator and 17511 for the air compressor.
>The transfer case will shift into neutral but will not go futher, the shift
>rod is clean with no rust, there is a lot of slop in the shift lever ( two
>inches of movement side to side ) and the linkage looks straight and not
>bent. I've tried to move steering wheel side to side and moving the truck
>foward and reverse as well as double clutching and no luck. I'm going to
>pick up the front and rear of the truck with track loaders and try to
>unwind the wind up, the transfer case is a spag. If there is a linkage
>poblem how do I adjust it ? Thanks to everyone for the assistance.
>
>
>===
>To unsubscribe from the mil-veh mailing list, send the single word
>UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.
>
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.