Re: [MV] M38 steering wheel stuck
Todd Paisley (paisley@erols.com)
Sat, 14 Nov 1998 20:02:18 -0500
>So far I've applied penetrating oil, heated the inside of the end of the
shaft
>with a light-duty torch several times, but so far no good. I'm using a 4"
>gear puller with a steel ring under the wheel to spread the pulling
pressure.
>I've had this moma cranked down so tight the plastic of the wheel is
cracking
>and I'm beginning to damage the end of the shaft where the nut threads on.
I would keep the wheel puller on (leave it under pressure). Keep applying
penetrating oil every so often. Let the penetrating oil do the work. Takes
longer, but it will eventually pop off.
Todd Paisley
===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.