Re: [MV] Flywheel problem

jonathon (jemery@execpc.com)
Mon, 18 Jan 1999 21:08:47 -0600

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: LSyman@aol.com: "Re: [MV] M35A2 Air Shift Transfer Case Question"
Previous message: tvddan.teresa: "[MV] Spliting rivits for canvass & welting"
Maybe in reply to: DenisDeck@aol.com: "[MV] Flywheel problem"

>I would like some advise on how to install a new flywheel on my MB. The book
>instructs you to drill the two tapered (stud) holes with a 35/64-inch drill,
>and ream the two holes with a 9/16 inch (.05625-inch) reamer.
>I have tried in vain locally to find this odd size drill and no luck finding
>the reamer.

This as VERY common stuff for a tooling supplier. Check with ANY place that
sells supplies and tooling for machine and tool & die shops. If all else
fails call MSC Supply Co. in NY somewhere (don't have number handy)

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

Next message: LSyman@aol.com: "Re: [MV] M35A2 Air Shift Transfer Case Question"
Previous message: tvddan.teresa: "[MV] Spliting rivits for canvass & welting"
Maybe in reply to: DenisDeck@aol.com: "[MV] Flywheel problem"