[MV] Multifuel prpoblem

MVTrucker@aol.com
Sat, 3 Apr 1999 12:47:25 EST

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Swoop737@aol.com: "Re: [MV] GPW pedals"
Previous message: David Hammond: "Re: [MV] Rifle holder on "British" GPW ?"
Next in thread: James Shanks: "Re: [MV] Multifuel prpoblem"

List,
I've developed an "oil producing" LDT4651C multifuel engine. It's now two
quarts over the fill mark. I'm thinking that there must be a seal on the
injector drive shaft that could be leaking fuel into the crankcase. Sound
right? Any other ideas? If I have to pull the injector pump, are there
timing marks on the drive gears that have to be in alignment before I take
the pump off the engine? I've got a pile of manuals, but they don't cover
motor problems.
Thanks for any help you can offer,
Joe Young MV Trucker@aol.com

===
To unsubscribe from the mil-veh mailing list, send the single word
UNSUBSCRIBE in the body of a message to <mil-veh-request@skylee.com>.

Next message: Swoop737@aol.com: "Re: [MV] GPW pedals"
Previous message: David Hammond: "Re: [MV] Rifle holder on "British" GPW ?"
Next in thread: James Shanks: "Re: [MV] Multifuel prpoblem"