From: Steve & Jeannie Keith (cckw@comcast.net)
Date: Wed Aug 25 2004 - 15:39:54 PDT
Are you sure that it is not the brake drum that is
stuck, and not the bearings? Having the bearings
stuck is very rare. Very common is the shoes
having worn down the drum and made a lip on
the inside that the shoes will now not pass over.
Steve AKA Dr Deuce
----- Original Message -----
From: <L51940@aol.com>
To: "Military Vehicles Mailing List" <mil-veh@mil-veh.org>
Sent: Wednesday, August 25, 2004 6:30 PM
Subject: [MV] stuck front bearing
> I am servicing front brakes on m35a2 and driver front drum won't come off
due to bearing being stuck on to spindle. Can I use puller pushing off of
axle shaft? I tried a little heat and have puller hooked up without too
much pressure on it. Any other ideas?
>
> Dave McConnell
>
> ===Mil-Veh is a member-supported mailing list===
> To unsubscribe, send e-mail to: <mil-veh-off@mil-veh.org>
> To switch to the DIGEST mode, send e-mail to <mil-veh-digest@mil-veh.org>
> To reach a human, contact <ack@mil-veh.org>
>
This archive was generated by hypermail 2.1.4 : Sat May 07 2005 - 20:34:22 PDT